New Page 2

The A300 dryfit now have exact and stronger replacements!
Exact case size replacement #'s are linked on the right.

If you have this Unit Number....?	OR the Battery Description...	Then your replacement unit is this..
791502GPW	A302/9.5S	A502/10s
791302GPW	A304/3S	A504/3.5S
791172GPW *	A306/1S	A206/1S
791182GPW	A306/1.1S	A506/1.2S
791312GPW *	A306/3S	A506/3.5
791472GPW	A306/6.5S	A206/6.5S
791523GPW	A306/9.5S	A506/10S
791185GPW	A312/1.1S	A512/1.2S
791202GPW	A312/1.8S	A512/2S
791315GPW	A312/3S	A512/3.5S
791432GPW	A312/5.7S	A512/6.5S
791525GPW	A312/9.5S	A512/10S

(Rated capacity defined as C20, 20 hr discharge to 1.75 V/cell) S = Flat contact for 4.8mm Faston Sockets *Also available for soldered connection

Sealed System: The Dryfit battery utilizes a totally sealed valve regulated system. There are no corrosive acid fumes or potential for electrolyte spillage under normal operating conditions.

Cycle Life: The Dryfit series includes batteries that offer outstanding deep cycle performance. The A200 series is designed to deliver 200 cycles at 100% depth of discharge per DIN and 400 cycles per IEC. The A300 Series is designed for 100/200 cycles per DIN/IEC.

Float Life: Both the Dryfit A200 and A300 are designed for 4-5 years of float service.

Low Self Discharge: The Dryfit series loses less than .1% of its rated capacity per day at 20 degrees Celsius ambient temperature.

Wide Temperature Range: Dryfit batteries will operate in temperature of negative 30 degrees Celsius to 50 degrees Celsius.

Simple Charging Method: Just one charging voltage for cycle or float service. No current limit needed.

Independence of Position: Dryfit batteries can be used in almost any position. The electrolyte is contained in a thixotropic gel which is injected under vacuum to surround the plates. Each cell is sealed with a one-way safety vent designed to release any excess gas. An upside down orientation is not recommended for float service.